Average Reviews:
(More customer reviews)I only installed (properly) this unit for a few days. It seems to work well. That is not the point of my review. I purchased and installed my first unit a few weeks ago. The waste water gushed down to the drain instead of tricking for few hours after each use (e.g., filling up a glass of filtered water).I thought the shut-off valve is bad so I got a replace unit. The second unit behaved the same way. At that point, I thought it is just a poor design -- a very wasteful design.As I was reading the review of other similar filters (I was ready to return my 2nd unit and buy a different model), I saw someone wrote something about there is section of tubing that has a insert in it. That immediately reminded me that I removed a section of tubing (a short red one on the waste line) that appeared to be redundant.Fortunately, I still have that piece of tubing. There it is! a small plastic insert on one end of the tubing. Apparently, this insert is to crease a back pressure so that the shut off valve can function correctly. After I put this section of tubing back in, it no longer continuously discharges water to the drain. I feel bad about returning that first unit. They probably should have include a line in the instruction to warn smart people like me.
Click Here to see more reviews about: Watts Premier RO-Pure 4-Stage Reverse Osmosis System
This four stage reverse osmosis system consists of a stage 1 five micron Sediment filter that traps particulate matter like dirt, rust, and silt that will affect the taste and appearance of your water. Stage 2 is a five micron Carbon Block filter that helps ensure a greater reduction of chlorine and other materials that cause bad taste and odors (these are called PRE-filters because they filter in front of the reverse osmosis membrane). Stage 3 is the heart of the reverse osmosis system, the RO Membrane.This 50 gallon per day semi permeable membrane will effectively reduce TDS (total dissolved solids), Sodium and a wide range of contaminants such as Lead, Arsenic, Percolate, Chromium, Copper and Radium. It will also remove over 99.95% cysts such as Giardia and Cryptosporidium. The larger production membrane of this state of the art system also means this system has been designed to reduce Nitrates and Nitrites from your drinking water. It is important that this system is properly installed and maintained with a minimum incoming water pressure of 40 psi for it to operate as designed.Stage 4 is a high quality Carbon filter (this is called a POST-filter because it filters after the membrane).The filtered water passes through the membrane and enters the storage tank.When you're ready for a taste, it will leave the storage tank and pass through this fourth stage on its way up to the faucet.The end result?Crystal clear, high quality, and great tasting water!In the Box: RO Pure Reverse Osmosis module (complete with filters)Parts Bag 1 3 Gallon Storage tank 1 Faucet bagInstructions (manual)
Click here for more information about Watts Premier RO-Pure 4-Stage Reverse Osmosis System
No comments:
Post a Comment